CJSC «The Republican Chamber of Entrepreneurs» produces and sells flexible wall ties for brick masonry of composite materials. The enterprise has own production facilities, uses patented equipment and own design technology.
Flexible wall ties INFIX™ with curved hooks for brick masonry are designed for joining internal, heat-insulating and facing layers of brick masonry. Can be used for fastening of a facing layer from small pieces of material and insulation to the base of a large-format ceramic block.
Flexible wall ties INFIX™ with curved hooks for brick masonry are the basalt-plastic rod with curved hooks at the ends. The original design of the flexible wall ties INFIX™ provide excellent anchoring, are characterized by a very high pulling force. They have a smaller diameter than the flexible connections of other manufacturers.
L — length of hook
R — radius of curvature of the hook;
a — angle of flexure.
|Length of wall tie, mm|
|Diameter of rod, mm|
|Tensile strength, MPa|
not less than 1000
|Strength of flexure, MPa|
not less than 1000
|Force of pulling out of flexible wall tie M100, N|
not less than 7000
Reference designationINFIX 250−5,
INFIX — flexible wall tie with two curved hooks at the ends;
250 is a length of the wall tie, mm;
5 is a diameter of the rod, mm.
Flexible wall ties INFIX™ save your money because our products are cheaper than their steel analogs.
Flexible wall ties are stronger than their steel analogs because they are made of composite materials. They provide stronger binding of external and internal part of walls. Hooks, flexible wall ties INFIX™, have the high force of pulling — the rod cannot be pulled out of brick masonry or concrete without rupture.
Resistance to corrosion
Flexible wall ties INFIX™ are resistant to an alkaline medium of concrete.
The composite material has a low thermal conduction. So, there are no «cold bridges» in walls, because they are raised with the INFIX™ flexible wall ties.